Specifications


Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase 
Surge Protection MOV rated for 150 Volts
Neutral Wire Required
Power Wire Leads
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped
and tinned, LINE (black), LOAD (red), NEUTRAL (white)

Ground Lead 6", 18 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting devices
Maximum Load 600 Watts
Minimum Load  No minimum load required
Certification  Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address 1 optional (comes unassigned)
X10 Scene Addresses 255 possible
X10 Status Response Supported
X10 Resume Dim Supported (by setting Local On-Level to zero) 
X10 Powerline Frequency  120 KHz
X10 Minimum Transmit Level 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level 10 mVpp nominal
X10 Messages Repeated  No

Source:http://www.smarthome.com/2476d‐light‐dimmer.html


‐29‐