Specifications


Combo Mode Message
Order
INSTEON, X10, INSTEON cleanup
Multi-Way Circuit Support
One KeypadLinc Dimmer controls load, Cross-Link any
number of KeypadLinc Dimmers or other INSTEON
Controllers
Setup Memory Non-volatile EEPROM
INSTEON Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 417 out of 16,777,216 possible
INSTEON Powerline
Frequency
131.65 KHz
INSTEON Minimum
Transmit Level
3.2 Vpp into 5 Ohms
INSTEON Minimum
Receive Level
1 mVpp nominal
INSTEON Messages
Repeated
Yes
Mechanical
Button Type 6 or 8 mechanical momentary contact type buttons
Button Appearance
Transparent plastic caps, holding preprinted or custom
button labels, with LED backlighting
Wire Nuts 3 included
Mounting
Mounts in single or multiple-ganged junction box.Controls
200 watts less load for each immediately adjacent electronic
dimmer installed. For example, 600 watt load capacity
becomes 400 watt with another electronic dimmer installed
to the immediate right or left. Use a triple-gang box with a
mechanical switch in the center to avoid de-rating
Operating Conditions Indoors, 40 to 104°F, up to 85% relative humidity
Dimensions 4.1" H x 1.8" W x 1.2" D
Weight 3.6 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Wire Leads
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped
and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead 6", 18 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting devices
Maximum Load 600 Watts (uses 12-Amp triac dimmer)
Minimum Load No minimum load required
Certification
Safety tested for use in USA and Canada (ETL #3059287-
001)

‐32‐