Specifications


Operating Conditions Indoors, 0 to 104°F, up to 85% relative humidity
Dimensions 3.75" H x 1.8" W x 1.2" D (2.75" H without screw tabs)
Weight 3.6 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Wire Leads
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped
and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead 6", 18 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting and inductive loads
Maximum Load 400 Watts incandescent, 10A inductive
Minimum Load No minimum load required
Certification Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address 1 optional (comes unassigned)
X10 Scene Addresses 255 possible
X10 Status Response Supported
X10 Resume Dim Supported (by setting Local On-Level to zero)
X10 Powerline Frequency 120 KHz
X10 Minimum Transmit
Level
3.2 Vpp into 5 Ohms
X10 Minimum Receive
Level
10 mVpp nominal
X10 Messages Repeated No

Source:http://www.smarthome.com/2475s.html



‐35‐