Installation guide

8 Supported Sensors and Control Devices
This section identifies the various sensors and control devices you can use with Climate Automation
Systems’ ENV climate control system.
Sensor/
Device
Description Part
Number
Source
I/O Module
Modbus module with 8
channel analog inputs and
13 relay outputs
Ai8_R13
http://www.datanab.com/controllers/
Ai8_R13.htm
I/O Module
Modbus module with 8
channel analog inputs/
analog outputs
AiO8
http://www.datanab.com/controllers/
AiO8.htm
I/O Module
Modbus module with 32
channel analog
Ai32
http://www.datanab.com/controllers/
Ai32.htm
Communicating
thermostat
Connects to, monitors, and
controls an HVAC
mechanical system
TR16-485
TR40
http://resconsys.com
http://www.automatedoutlet.com/pro
duct.php?productid=221
or
http://www.asihome.com/ASIshop/p
roduct_info.php?products_id=1291
or
http://www.discounthomeautomatio
n.com/cgi-
bin/main/co_disp/displ/category_id/
724/product_id/6925/RCS-
Communicating-Thermostat-RS485
VLINX Serial to Ethernet converter esp901
http://www.bb-
elec.com/product_family.asp?family
id=2
Temperature
sensor
Provide precision remote
temperature sensing
ST-R3 or
ST-R3S or
ST-R3R
http://www.kele.com/olcat/t1/10288.
html
Humidity
sensors
Measure relative humidity
from 0% to 100%
KHD or
KHO or
KHR
http://www.kele.com/olcat/h2/10820
.html
Immersion
sensor
Provides precision remote
temperature sensing
ST-W3E
-XHP
http://www.kele.com/olcat/t1/10297.
html
Duct temp-
erature sensor
Temperature sensor for duct
mounting
KTD3 http://www.kele.com
Thermal
conducting
compound
Facilitates heat transfer
between mating surfaces
TCC-111 http://www.kele.com
Installation Guide Page 19 of 20 Copyright 2009