User's Manual

Fan Mode
FAN Button
The FAN button controls the HVAC system’s MANUAL fan mode. The current manual fan mode is
displayed above the button. Press the FAN button to go to the FAN MODE selection screen shown below.
Fan Mode Screen
Normally the FAN mode is in the Auto mode (the system fan is automatically controlled by HVAC system).
If you want the FAN on manually, select the ON mode. The fan will run continuously until it is turned off by
selecting AUTO mode.
Optional Fan Mode
Fan Cycler. If the Fan Cycler feature is enabled in the Installer Setup, the additional fan mode “Cycle”
will be shown in the Fan Mode menu. This mode cycles the fan on and off continuously for fresh air
ventilation according to the settings in the Installer Setup.
Select Fan mode with
Up or Down buttons.
FAN MODE
AUTO
ON
DONE
Down
Up
Press DONE button to select mode and exit
back to main Thermostat Control Screen.
FAN
Press FAN button to go to the FAN Mode screen.