User's Manual

Main menu - Schedules
Schedules is an optional menu item. It will only show up in the menu list if “Schedules” is enabled in the
Installer settings for the thermostat. Provides for local schedule control. The Schedules Screen allows
you to review and set the setback schedule for the thermostat. The thermostat has a 4 x 7 schedule.
Four times a day can be selected for changes to the heating and cooling setpoints. Each day of the week
can have a different schedule. Groups of days can be copied with the same schedule. When the
thermostat is set to “Run” mode, the schedule will be executed daily, with the setpoints being changed as
per that days schedule stored in the thermostat. “Hold” mode stops schedule operation and holds the
current setpoints until changed manually or by network commands.
The Schedules Screen gives you the option of setting a custom setback schedule or to load one of two
preset schedules.
Menu Options
• Heat and Cool: You can change the individual day/hour and setpoints for the Heating and
Cooling schedule by selecting this menu item.
• Preset: Comfort: This is a preset schedule with mild setbacks. Select this menu item to load
the Comfort schedule into the thermostat. Confirmation screen will be displayed for Yes/No entry.
• Preset: EnergyMiser: This is a preset schedule with deeper setbacks. Select this menu item to
load the EnergyMiser schedule into the thermostat. Confirmation screen will be displayed for
Yes/No entry.
Schedules Screen
Select menu item with
Up or Down buttons.
Select Schedule
Heat and Cool
Preset: Comfort
Preset: EnergyMiser
DONE
Down
Up
Press DONE button to exit back to main
thermostat screen.
SELECT
Press SELECT button to go to the submenu screen.