User's Manual

DCN: 141-02071-01 Page 6
C Away Away setpoints are used when the thermostat is set to the setback or away
mode.
H Away Away setpoints are used when the thermostat is set to the setback or away
mode.
System Menu Items
Systype Select the system type, HP for HeatPump, S for Standard (Gas/Elec)
CO Select the ChangeOver type (HP systems only), changeover with Heat or Cool
Fantype Select Fantype (Gas/Elec only), Gas or Electric
ZWave Install
This menu item allows you to install or uninstall the thermostat into the ZWave network.
Follow the instructions in the ZWave Installation section.
Thermostat Info
The Thermostat Info screen displays the current configuration of the thermostat. This
information is useful for quick check of firmware versions and HVAC system setup. It also
shows the ZWave network settings.
Thermostat information displayed is:
• Version - Firmware version number.
• Node ID – ZWave Node ID
• Home ID –ZWave Home ID
• System Type - Standard or Heat Pump HVAC system
• Fan Type – if HVAC type = Standard: Gas or Elect
OR
• Changeover – if HVAC type = Heat Pump: Changeover with cool or changeover
with heat.