User's Manual

B) Single Stage Heat Pump System
If there are additional wires, see the wiring diagrams on page 4 and 5.
Check connections
 Check that the wires are screwed into the terminal blocks firmly.
 Gently pull on the wires to confirm the connection.
 Push all the excess wiring back into the wall.
Mount the thermostat
Install the thermostat on to the base.
Turn on the power at the HVAC system or breaker panel.
R
G
Y
24C
24RH
W1
O
RS1
RS1
RSC
H1
24RC
G
Y1
Y2
RS2
RS2
RSC
HC
W
C*
O/B**