Install Instructions

PRODUCT DATA
62-3106-04
Braukmann
AM-1 SERIES “R Model” - Heating Only
PROPORTIONAL THERMOSTATIC MIXING AND DIVERTING VALVE PATENTED
PRODUCT INFORMATION
• HEATING ONLY (Not intended for potable water usage).
•Teflon
®
coated spool and body to prevent mineral buildup
and extended valve life.
• Lockable Handwheel.
• Nickel plated brass/bronze construction, EPDM O-rings.
• Constant water temperature under different operating
conditions.
• Proportional valve (simultaneous control of hot and cold
water).
• Straight thru design (hot and cold at same level).
• Designed for easy maintenance and element replacement
(Refer to page 4).
• Union Sweat, Union Threaded, Union Propress, and Union
PEX connections available (Refer to Table 1).
• Patent No. 6,079,625.
SPECIFICATIONS
Maximum Hot Water Inlet Temperature: 212° F (100° C).
NOTE: Consult PEX tubing manufacturer for maximum
allowable temperature ratings.
Media Temperature Ranges:
Cold Inlet: 39° - 80° F (4° - 27° C)
Hot Inlet: 120° - 212° F (49° - 100° C)
Mixed Outlet: 70° - 180° F (21° - 82° C)
Maximum Pressure Rating: 150 psi (1034 kPa).
Minimum Required Temperature Difference
between hot and mix: 3° F (1.6° C).
Minimum Flow: 0.5 Gpm (1.9 Lpm).
Body Material: Nickel plated Brass/Bronze construction,
Teflon coated valve body wear surface, Teflon coated
brass shuttle, EPDM O-rings, proportional design
(simultaneous control of hot and cold ports), with either
sweat union, NPT (female) union, Propress union, or union
PEX connections.
Temperature Gauge Adapter: Lead-free brass, EPDM o-ring
Valve Body: Refer to Fig. 8.
Connections: Union Sweat, Union NPT (female),
Union Propress, and Union PEX.
Dimensions: Refer to Fig. 1 and Table 1.
Fig. 1. Dimension Diagram. See Table 1.
M36654
MIX
H
C
B
C
2-1/4
(57)
Ø 1-51/64
(46)
A
3-5/32 (80)