Submittal Sheet
DS06 DialSet
®
LOW LEAD PRESSURE REGULATING VALVES
SUBMITTAL SHEET
APPLICATION
The Honeywell DS06 DialSet Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant
outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The
downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static
pressure only).
Job Name
Engineer
Mechanical Contractor
Contractor’s P.O. No.
Representative
Notes
Model(s)
Qty. Notes
Qty. Notes
Qty. Notes
Approval
Service
Tag No.
33-00063-03
Specications
Model: DS06 DialSet Pressure Regulating Valves.
Regulator Mechanism: Fabric-reinforced diaphragm.
Seat Design: Balanced single seat construction.
Inlet Pressure (Maximum): 250 psi maximum.
Reduced Pressure Range: 25 to 90 psi (1/2 in. to 2 in.).
Outlet Pressure: Factory set at 60 psi (414 kPa).
Dial Calibration: ± 4 psi.
Differential: 14.5 psi minimum (inlet to outlet).
Fluid Temperature (Maximum):
Air: 140° F (60° C).
Water: 140° F (60° C).
Ambient Temperature Range: 33° F to 140° F (1° C to 60° C).
Pipe Sizes Available: 1/2 in., 3/4 in., 1 in., 1-1/4 in.,
1-1/2 in. and 2 in. available.
Model Number Pipe Size Dimensions, Approximate
Inch Inch (H x L) mm (H x L)
Single-Union Sweat
DS06-100-SUS-LF 1/2” 5-53/64” x 3-55/64” 148 x 98
DS06-101-SUS-LF 3/4” 5-53/64” x 4-3/8” 148 x 111
DS06-102-SUS-LF 1” 6-15/16” x 5-15/64” 176.5 x 133
DS06-103-SUS-LF 1-1/4” 6-15/16” x 5-5/8” 176.5 x 143
DS06-104-SUS-LF 1-1/2” 11-13/16” x 6-39/64” 300 x 168
DS06-105-SUS-LF 2” 11-13/16” x 7-9/16” 300 x 192
Single-Union Treaded
DS06-100-SUT-LF 1/2” 5-53/64” x 4-1/64 148 x 102
DS06-101-SUT-LF 3/4” 5-53/64” x 4-3/8 148 x 111
DS06-102-SUT-LF 1” 6-15/16” x 5” 176.5 x 127
DS06-103-SUT-LF 1-1/4” 6-15/16” x 5-7/16” 176.5 x 138
DS06-104-SUT-LF 1-1/2” 11-13/16” x 6-1/2” 300 x 165
DS06-105-SUT-LF 2” 11-13/16” x 7-1/8” 300 x 181
Union Body, No Tailpeices Only
DS06-100-LF 1/2” 5-53/64” x 3-5/32” 148 x 80
DS06-101-LF 3/4” 5-53/64” x 3-35/64” 148 x 90
DS06-102-LF 1” 6-15/16” x 3-15/16” 176.5 x 100
Model Number Pipe Size Dimensions, Approximate
Inch Inch (H x L) mm (H x L)
DS06-103-LF 1-1/4” 6-15/16” x 4-9/64” 176.5 x 105
DS06-104-LF 1-1/2” 11-13/16” x 5-1/8” 300 x 130
DS06-105-LF 2” 11-13/16” x 5-43/64” 300 x 144
Double-Union Sweat
DS06-100-DUS-LF 1/2" 5-53/64” x 4-9/16” 148 x 116
DS06-101-DUS-LF 3/4" 5-53/64” x 5-13/64” 148 x 132
DS06-102-DUS-LF 1" 6-15/16” x 6-17/32” 176.5 x 166
DS06-103-DUS-LF 1-1/4" 6-15/16” x 7-1/8” 176.5 x 181
DS06-104-DUS-LF 1-1/2" 11-13/16” x 8-7/64” 300 x 206
DS06-105-DUS-LF 2" 11-13/16” x 9-29/64” 300 x 240
Double-Union Treaded
DS06-100-DUT-LF 1/2" 5-53/64” x 4-7/8” 148 x 124
DS06-101-DUT-LF 3/4" 5-53/64” x 5-13/64” 148 x 132
DS06-102-DUT-LF 1" 6-15/16” x 6-1/16” 176.5 x 154
DS06-103-DUT-LF 1-1/4" 6-15/16” x 6-47/64” 176.5 x 171
DS06-104-DUT-LF 1-1/2" 11-13/16” x 7-7/8” 300 x 200
DS06-105-DUT-LF 2" 11-13/16” x 8-37/64” 300 x 218
Connections: Can be congured as female thread-by-thread, single- or
double-union, NPT threaded or sweat.
Low Lead Content: < 0.25% Lead.
Gauge Tap: 1/4” NPT.
Approvals:
ASSE 1003-2009 Certied.
CSA: B356-10 and IAPMO Listed.
Materials
Body: Bronze
Internal Parts: Stainless steel and engineered plastics
Regulator Mechanism: Fabric-reinforced diaphragm
*Lead Free Plumbing Code Compliance: The wettable surfaces of lead
free models contain less than 0.25% of lead by weighted average.
Dimensions