User Guide

PRODUCT DATA
62-3086
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9
customer.honeywell.com
® U.S. Registered Trademark
© 2007 Honeywell International Inc.
62-3086 J.I. 04-07
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
GoldTop Air Vent
FV180, FV180A, FV183
APPLICATION
The GoldTop Air Vent is a spring-loaded, float type air vent. It
is used in heating systems to vent air, which has accumulated
due to the heating of cold water.
FEATURES
• Male Connection.
• Four Sizes Available.
• Higher Capacity.
• Vents Up To 150 psi (1034 kPa).
SPECIFICATIONS
Maximum Pressure: 150 psi (1034 kPa).
Maximum Temperature: 240 °F (116 °C).
INSTALLATION
Install GoldTop into the heating system at the high point, or
wherever air would accumulate to remove the air. Typical
recommended locations are: on boiler top, on top of an air
purger, etc. Loosen thumb cap to allow air to vent.
Product
Number
Height Diameter
Connection
in inches
Weight in
lb (kg)in inches (mm)
FV180 3.25 (83) 1.85 (47) 1/8 NPT 0.4 (0.2)
FV180A 3.25 (83) 1.85 (47) 1/4 NPT 0.4 (0.2)
FV183 3.82 (97) 1.85 (47) 3/4 NPT 0.6 (0.3)