Install Instructions

MAGNETIC HYDRAULIC SEPARATORS
5 33-00541EF—01
Flanged models
The separator is already equipped with an insulation shell.
1. Install the drain valve on the lower part of the separator
body.
2. Fit the air vent valve with the interception valve on the
upper spacer of the separator body.
3. Install the self-sealing magnet kit on the front
connection located in the lower portion of the
separator body.
4. Reinstall the insulation shell with adhesive seal on the
separator body.
5. Once all components are installed, the separator must
be fitted in vertical position, with the air vent automatic
valve placed on the upper spacer, and connected
according to the flows shown on the label.
Fig. 7.