Product Overview

Magnetic Hydraulic Separator
HYDROSEP-1XX
SUBMITTAL SHEET
Job Name
Engineer
Mechanical Contractor
Contractor’s P.O. No.
Representative
Notes
Model(s)
Qty.
Notes
Qty.
Notes
Qty.
Notes
Qty.
Notes
Approval
Service
Tag No.
APPLICATION
In modern hydronic installations, the HYDROSEP-1 magnetic
hydraulic separator performs the following functions:
• Hydraulic separator: Makes connected hydraulic circuits
independent, preventing any flow influence between circulators
installed in series and balancing the difference of flows through the
circuits, all according to the characteristics of their corresponding
circulator.
• Dirt separator: Separates and eliminates any debris inside the
circuits thanks to the combined action of a magnet and a metallic
mesh surface which allow for the separation to take place. The
impurities can subsequently be removed by the discharge valve.
• Deaerator: Separates and eliminates the air inside the circuits
through the air vent placed on the separator’s upper connection. The
hydraulic separators are equipped with insulation to minimize
thermal loss.
OPERATING SPECIFICATIONS
(UNION VERSION)
Temperature Range: 32-230 °F (0-110 °C)
Max. Working Pressure: 145 psi. (10 bar)
Max. Pressure of Air Vent Operation: 102 psi. (7 bar)
Fluids Used: Water, glycol-based solution (max. 50% glycol
concentration)
Separator Connections: See Table 2.
Air Vent Valve Connection: 1/2 in. ISO228
Drain Tap Connections: 3/4 GHT and threaded cap
Additional Frontal Connections: 1/2 in. ISO228
Table 1. Dimensions for Union Versions (in Inches).
Model Number
Size
A
B
C
D
E
F
G
H
HYDROSEP-102-U/U
1 in.
21.5
5.6
8.7
7.3
5.8
4.6
3
4
HYDROSEP-103-U/U
1-1/4 in.
23.3
6
9.4
7.8
6.5
5.1
3.5
4.5
HYDROSEP-104-U/U
1-1/2 in.
25.3
6.6
10.2
8.4
7.7
6.1
4.5
5.5
HYDROSEP-105-U/U
2 in.
27
7.1
11
8.9
8.7
7.1
5.5
6.5
Table 2. Required Adapters (Union Versions).
Model Number*
Description
HS-NPT-102/U
1 in. Union NPT Threaded Adapter, 2 NPT Fittings
HS-NPT-103/U
1-1/4 in. Union NPT Threaded Adapter, 2 NPT Fittings
HS-NPT-104/U
1-1/2 in. Union NPT Threaded Adapter, 2 NPT Fittings
HS-NPT-105/U
2 in. Union NPT Threaded Adapter, 2 NPT Fittings
HS-PRESS-102/U
1 in. Union Press Adapter, 2 Press Fittings**
HS-PRESS-103/U
1-1/4 in. Union Press Adapter, 2 Press Fittings
HS-PRESS-104/U
1-1/2 in. Union Press Adapter, 2 Press Fittings
HS-PRESS-105/U
2 in. Union Press Adapter, 2 Press Fittings
HS-SWEAT-102/U
1 in. Union Sweat Adapter, 2 Sweat Fittings
HS-SWEAT-103/U
1-1/4 in. Union Sweat Adapter, 2 Sweat Fittings
HS-SWEAT-104/U
1-1/2 in. Union Sweat Adapter, 2 Sweat Fittings
HS-SWEAT-105/U
2 in. Union Sweat Adapter, 2 Sweat Fittings
* Each vessel requires 4 union fittings.
** When 1 inch HS-PRESS-102/U press adapters are required, a HYDROSEP-103-U/U 1-1/4 inch vessel must be used to accommodate unions.
Note: Product/accessories/parts are to be used for closed heating systems only.