Submittal Sheet

AquaPUMP Variable Speed Circulating Pumps
SUBMITTAL SHEET
Job Name
Engineer
Mechanical Contractor
Contractor’s P.O. No.
Representative
Notes
Model(s)
Qty.
Notes
Qty.
Notes
Approval
Service
Tag No.
APPLICATION
The Resideo AquaPUMP Variable speed, in-line, wet rotor circulator is
designed for variable or constant pressure applications in closed-loop
hydronic heating and cooling systems, as well as open circulation
systems (stainless steel model).
The Resideo AquaPUMP auto zone changes the pump speed according to
the system demand without any requirement of external controls or
control wiring.
The Resideo AquaPUMP circulator is recommended for circulating water
in closed hydronic heating systems or potable water systems (stainless
steel model).
The Resideo AquaPUMP includes operating modes suitable for systems
with constant or variable flows, such as:
• Underfloor heating systems
• One-pipe (series) systems
• Two-pipe (parallel) systems
• Multi-zone heating systems
Resideo AquaPUMP circulators incorporate variable speed control
technology with an ECM motor, enabling optimum energy efficiency and
occupant comfort, with built-in control algorithms that can adapt to
continuously changing system requirements.
The Resideo AquaPUMP features a user-friendly front mounted control
panel and wiring box for ease of installation.
The pump is non-submersible and for use in dry, frost free, well ventilated
installations.
SPECIFICATIONS
Control:
Variable or fixed speed
Multi-select pressure sensing operation
0-10VDC external operation
Motor Protection: The motor includes an internal thermal overload
protection. External motor protection is not required.
Maximum Fluid Temperature: 230 °F ( 110 °C) maximum
Maximum Working Pressure: 150 psi (10 bar).
Maximum Relative Air Humidity (rh): 95%.
Standards: Insulation Class H
Certification: ETL listed for US and Canada (conforms to ULSTD.778
certified to CSA STD. C22.2 No.108-01)
*NSF 372 (for stainless steel models)
Additional specifications on reverse side.
MATERIALS OF CONSTRUCTION
Body: Cast iron (closed systems), stainless steel (open systems)
Motor Housing: Aluminum
Impeller: Noryl
Shaft: Ceramic
O-Ring/Flange Gaskets: EPDM rubber
Bearings: Ceramic
Bearings Plate: Stainless steel
Motor Cap: Stainless steel
Table 1. Dimensions.
Product Number
Max. Flow
Max. Pressure Head
Connections
Weight
lbs. (kg)
Dimensions
GPM
LPM
Feet
Meters
Bolt Hole
Spacing
Bolt Hole
L1
in. (mm)
L2
in. (mm)
L3
in. (mm)
L4
in. (mm)
L5
in. (mm)
PCVF-ECM2020/U 20 75.7 20 6
3-5/32 in.
(80.2 mm)
1/2 in.
(12.7 mm)
8.0
(3.6)
6.50
(165)
7.08
(180)
5.75
(146)
5.31
(135)
3.25
(80)
PCVF-ECM2020-LF/U 20 75.7 20 6
3-5/32 in.
(80.2 mm)
1/2 in.
(12.7 mm)
8.0
(3.6)
6.50
(165)
7.08
(180)
5.75
(146)
5.31
(135)
3.25
(80)
Table 2. Accessories and Spare Parts.
Product Number
Description
PCG100/U
1 in. and 1-1/4 in. circulating pump flange gaskets
PCV100/U
1 in. and 1-1/4 in. circulating pump check valve