Users Manual

RTF0B4T1AL59UB
@2019Resideotechnologylnc..20
6. The host end product must include a user manual that clearly defines operating requirements and conditions
that must be observed to ensure compliance with current FCC RF exposure guidelines.
For portable devices, in addition to the conditions 3 through 6 described above, a separate approval is required
to satisfy the SAR requirements of FCC Part 2.1093
If the device is used for other equipment that separate approval is required for all other operating configurations,
including portable configurations with respect to 2.1093 and different antenna configurations.
For this device, OEM integrators must be provided with labeling instructions of finished products. Please refer
to KDB784748 D01 v07, section 8. Page 6/7 last two paragraphs:
A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently
affixed label, the module must be labeled with an FCC ID - Section 2.926 (see 2.2 Certification (labeling
requirements) above). The OEM manual must provide clear instructions explaining to the OEM the labeling
requirements, options and OEM user manual instructions that are required (see next paragraph).
For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible when
installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used
methods for access to remove the module so that the FCC ID of the module is visible; then an additional
permanent label referring to the enclosed module:“Contains Transmitter Module FCC ID: CFSRTF0B4T1” or
“Contains FCC ID: CFSRTF0B4T1” must be used. The host OEM user manual must also contain clear instructions
on how end users can find and/or access the module and the FCC ID.