Users Manual

RTF0B4T1AL59UB
@2019Resideotechnologylnc..9
Total TX/RX Current
Parameter Description Min. Typ. Max. Units
15.4 TX Active @20dBm 1Mbps radio transmitting — 125 — mA
15.4 TX Active @14dBm 1Mbps radio transmitting — 66 — mA
15.4 TX Active @10dBm 1Mbps radio transmitting — 46 — mA
15.4 RX Active radio in receive mode — 12.2 — mA
BLE TX Active @20dBm 1Mbps radio transmitting — 125 — mA
BLE TX Active @14dBm 1Mbps radio transmitting — 66 — mA
BLE TX Active @10dBm 1Mbps radio transmitting — 46 — mA
BLE RX Active radio in receive mode — 12.2 — mA
Icore Active
MCU active, radio off and
FEM sleep
— 2.62 — mA
Sleep mode RTC running, MCU sleep — 0.252 — μA
Table 2-5:Radio performance conducted
Index Parameter Condition Value Unit
Explanation to the Criteria
Setting
TX_10 Output Power
VCC=3.0,CW,
25°C,2405MHz, 2440MHz,
2480MHz
at antenna port
20 +/-1.5db dBm
For obtaining a output power level of
20dBm and minimizing the supply
current, the output power of JN5169
should be set to -1.3dBm.Thenomianl
output power level of FEM should be
around 20dBm
TX_11
Output power
variation over
temperature
VCC=3.0, CW,
2405MHz, 2440MHz,
2480MHz
Temperature=-20°C,
-10°C, 25°C, 55°C, 70°C
<+/- 1 db According to Comments
TX_12
Output power
variation over
Voltage
VCC= 2.4, 3.3,
3.6, OQPSK, CW,
25°C,2440MHz
<+/- 1 db
No related parameters in datasheet.
Will review if the measurement
results are reasonable or not.