Instructions / Assembly

Back Panel (1PC)
(B)
(D)
(C)
Front Legs (2PCS)
Seat (1PC)
(A)
STEP-BY-STEP ASSEMBLY:
Arms
(2PCS)
Back Seat
Beam (1PC)
(E)
Back
Back
Front
Attach Front Legs (C) to Seat (A) by
inserting 3x 2.55” Bolts (H) on each side into
the corresponding holes. Secure each bolt with
a washer (G) and nut (F) as pictured.
Attach the front part of the Arms (D) to the
Front Legs (C) using 2.55” Bolts (H) and secure each
with washer (G) and nut (F) as pictured on each side.
Attach the Back (B) to the Seat (A) using
2.4” Screws (J). Attach Back (B) to Arms (D) using
3.15” Screws (L) as pictured.
Attach Back Seat Beam (E) between the
rear legs using 2.4”Screws (J) as pictured.
ADI
F. Lock Nut - 8Pcs
G. Washer - 8Pcs H. Bolts 2.55” - 8Pcs
J. Screws 2.4” - 4Pcs
L. Screws 3.15” - 2Pcs
M. Allen Wrench - 1Pc N. Wrench - 1Pc
A. Seat - 1Pc
B. Back - 1Pc
C. Front Legs - 2Pcs
D. Arms - 2Pcs
E. Back Seat Beam - 1Pc
H
H x3
ResinTEAK
H
J
J
L
J
J
L
H
F
/ /
G
F G
/
STEP 1:
STEP 2:
STEP 3:
STEP 4:
*IMPORTANT NOTE: DO NOT OVERTIGHTEN THE BOLTS*
Tighten all bolts and screws after assembly is
complete.