User's Manual

ManualsBrandsResolution Products ManualsElectronicsDriveway Transmitter, 345MHz

Page 1 of 3 www.ResolutionProducts.com 28-Jul-11

RE204_Honeywell-Compat_Driveway_Instructions.doc

Wireless

Security

Solutions

RE204 Honeywell-Compatible Driveway Sensor

Features

• For sensing Vehicles passing by.

• Sensor continuously monitors earth’s magnetic field. When the large

metal mass of a vehicle drives by, the earth’s magnetic field is twisted.

The sensor then transmits a signal wirelessly to the control panel.

• Immune to pets, wildlife, leaves, dust, sunlight.

• NO DIGGING!

• Weatherproof design handles all environments.

• Strong, reliable RF signal.

• 3-5 year battery life on C battery.

• Low Battery indication.

Key Instructions

• Battery “+” face away from springs. Secure batteries with binder.

• Use as a chime function. Do not use as an alarm zone.

• Use 90-degree post mount bracket, or ground stake.

• Mount sensor within 12 feet of target vehicle. Mount more than 24 feet

from street.

• Do not plug drain & air holes. Do not overtighten top.

• Bumping the sensor will cause it to false (it thinks the world moved).

• Performance Effects:

Increased Response Decreased Response

Close to vehicle Far from vehicle

Higher (door handle level) Ground level

Slow vehicle Fast vehicle

Large metal vehicle Small vehicle with lots of plastic

Jumper on Hi Sensitivity Jumper on Lo Sensitivity

Generally, it shouldn’t matter which direction the sensor

head is rotated. But turning it 90 degrees may cause some

performance change +/-.

• Enrolling:

 Put panel in RF enroll mode.

 Disconnect and then connect sensor battery. Special transmission

occurs on power-up. Will enroll as Loop 2.

 Use as a “Chime”, not an Alarm.

 Supervision by panel is optional.

Page 2 of 3 www.ResolutionProducts.com 28-Jul-11

RE204_Honeywell-Compat_Driveway_Instructions.doc

Specifications

Vehicle sense distance: 0 – 15 feet

Mounting hardware: post flange or ground stake

Replacement Battery: C-Cell

Temperature Range: 0F to 120F

[Note: high temperatures and high humidity can have a

significant effect on alkaline battery performance.]

Housing dimensions: 5.1 x 3.8 inches

Specifications subject to change without notice.

Exploded Picture

Batteries secured

by binder

Magnetic

sensor

[ Loop 2 ]

Push batter

y down

towards spring,

and release to

cause enrollment

transmission

Do not pull

antenna

Jumper on Low Sensitivity

Jumper on Medium Sensitivity

Jumper on High Sensitivity

Summary of content (2 pages)

PAGE 1
Wireless Security Solutions RE204 Honeywell-Compatible Driveway Sensor Features • For sensing Vehicles passing by. • Sensor continuously monitors earth’s magnetic field. When the large metal mass of a vehicle drives by, the earth’s magnetic field is twisted. The sensor then transmits a signal wirelessly to the control panel. • Immune to pets, wildlife, leaves, dust, sunlight. • NO DIGGING! • Weatherproof design handles all environments. • Strong, reliable RF signal. • 3-5 year battery life on C battery.
PAGE 2
Notices “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation.