Manualshelf

User's Manual

ManualsBrandsResolution Products ManualsElectronicsWireless Keypad, 345MHz
12
RE252_Honeywell-Compat_PIN-Pad.doc Page 1 of 4 28-Sep-12
www.ResolutionProducts.com
Wireless
Security
Solutions
RE252 Honeywell Compatible PINpad™
Features
• Secure, 4-digit Code to disarm
• 1-button arming
• Red/Green LED arming feedback
• Small, yet comfortable keypad
• Mounts on wall via VHB® tape, or screws
• Secure for carrying in purse or mounting on car visor
• More securely replaces Honeywell 5878 6-button Wall Touchpad
• 4-6 year battery life on CR2032 battery.
Key Instructions
• Do NOT use this product for 2GIG panels. Use the RE252
T.
• PIN Code programming
Default access code is “1234”.
To change access code:
1. Enter current 4-digit access code.
2. Within 4 seconds, press and hold the “1” and “3” keys
simultaneously. After 3 seconds, Red LED will be lit.
3. Enter new 4-digit access code. After successfully changing
the code, the Green LED will be lit
4. Note new access code . BAD GUY CANNOT RESET CODE.
So it must be noted and remembered!
• Enrolling:
1. Refer to the Honeywell control unit installation manual.
2. Enroll exactly as you would a key fob.
• Specific Control Panel Programming follows here…
Lynx Touch 5100:
Programming Keys Add New
System Programming…
Key Type
4 Button
User
Master
Serial Number
[press Stay key to enroll]
Zone
49 (example)
Button Key 1 – Zn 49
Arm Away
Button Key 2 – Zn 50
Disarm
Button Key 3 – Zn 51
Arm Stay
Button Key 4 – Zn 52
24 Hour Auxiliary
To RF Learn: Press the PINpad STAY button twice, more than 5 seconds apart.
Be at least 5 feet from panel.
RE252_Honeywell-Compat_PIN-Pad.doc Page 2 of 4 28-Sep-12
www.ResolutionProducts.com
Lynx Touch 5100, continued…
Lynx Plus 3000 & Vista:
To RF Learn: Press each PINpad button (or PIN Code) twice, more than 5
seconds apart.
Be at least 5 feet from panel.
Be sure to associate the Key with a User!
You may also use WIRELESS KEY TEMPLATE 3.
Operation
2GIG Go! Panel
Use Resolution RE252
T
2GIG-Compatible PINpad for 2GIG panels.
Panic function will not work on 2GIG panel using this RE252
Honeywell version.
PINpad
Button
Lynx Touch
Button Key
Lynx Touch
Loop
Shoul
d be
programmed to
Away Button Key 1 Loop 3 ARM AWAY
PIN Code Button Key 2 Loop 2 DISARM
Stay Button Key 3 Loop 4 ARM STAY
Stay + Away Button Key 4 Loop 1 24 Hour AUX
PINpad
Button
Lynx Plus
Zone Number
Zone Type
Input Type
Lynx Plus
Loop
Away 26 (example)
21 Arm-Away BR Loop 3
PIN Code 27 22 Disarm BR Loop 2
Stay 28 20 Arm-Stay BR Loop 4
Stay + Away 29 07 24 Hr Aud BR Loop 1
PINpad
Button
Panel Action LED
Stay ARM STAY flashes double red
Away ARM AWAY flashes double red twice
PIN Code DISARM flashes double green
Stay + Away PANIC ALARM flashes red 8 times

Summary of content (2 pages)