User's Guide
Table Of Contents
- Introduction
- Your hearing aid
- How to get your hearing aid ready for use
- How to place the hearing aids in your ears
- How to remove the hearing aids from your ears
- How to use your hearing aids
- Advanced options
- How to clean and maintain your hearing aids
- Wireless accessories
- Tinnitus Management
- General warnings
- Troubleshooting
- Warnings to hearing care professionals (US only)
- Regulatory information
- Hearing aid variants
- Additional information
- Notes
Push button (optional)
Your hearing aid has a push button allowing you to use up to four different listening programmes. The
list on page 2 tells which programs have been enabled.
1. Tap the programme button to switch between programmes.
2. You will then hear one or more beeps. The number of beeps indicates which programme you
have selected (one beep = programme one, two beeps = programme two, etc.).
3. When you turn the hearing aids off and then back on, they always return to the default setting
(programme one and preset volume).
NOTE: If you have two hearing aids with the Synchronised Push Button enabled, programme
changes to one hearing aid automatically repeats in the second hearing aid. The same number
of confirmation beeps will follow in the second hearing aid. This Synchronised Push Button can
also be configured to allow one side to control volume increase and the other to control volume
decrease. The volume changes to one hearing aid are repeated on the other side to keep levels
the same.
16