User's Guide
Table Of Contents
- Introduction
- Your hearing aid
- How to get your hearing aid ready for use
- How to place the hearing aids in your ears
- How to remove the hearing aids from your ears
- How to use your hearing aids
- Advanced options
- How to clean and maintain your hearing aids
- Wireless accessories
- Tinnitus Management
- General warnings
- Troubleshooting
- Warnings to hearing care professionals (US only)
- Regulatory information
- Hearing aid variants
- Additional information
- Notes
6. Gently pull the new filter out of the dial.
7. Align the new filter to the sound outlet.
8. Press the new filter into the opening, and simultaneously pull and rock back and forth until the
new wax filter is in place.
Change Cerustop (white) wax filters
1. To remove the old wax guard, insert the removal side of the wax guard tool into the used wax
guard so that the shaft of the tool is touching the rim of the wax guard. Slowly pull the wax guard
straight out.
2. To insert the new wax guard, gently press the replacement side of the wax guard tool straight
into the hole of the sound outlet until the outer ring lies flush with the outside of the receiver.
Pull the tool straight out - the new wax guard will remain in place.
NOTE: Pressing on the new filter with the flat side of the wax filter tool can ensure that the filter
is correctly in place.
NOTE: If a different type of wax filter is used for your hearing aids, or if your hearing aids do not
use wax filters, consult your hearing care professional for guidance.
CAUTION:Use only original consumables from the manufacturer e.g. wax filters.
26