User guide

2120
ReSound Vea™ supplement— BTEs
NOTES:
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
Preparing a Tulip-Dome for insertion
The Tulip-Dome consists of two “petals” and it is im-
portant that the largest “petal” is the outermost “petal”
(figure 3).
This can easily be done by pushing the “petals” away
from the sound tube with your finger (figure 1). This will
make the large “petal” bend forward. Then you push it
back and it will be placed on top of the smaller “petal ”
(figure 2). Now the Tulip-Dome is ready to be mounted
on the Thin Tube. Mount the Tulip-Dome on the Thin
Tube by pushing it over the groves on the Thin Tube.
Make sure it is securely fastened (figure 3).
3
1
2
IMPORTANT: Please refer to the documentation
provided with your hearing instrument for
important precautions and warnings.