User guide

20
21


1. Remove the tube from the instrument before cleaning by
unscrewing it.
2. Use a damp cloth to clean the tube
and dome on the outside.
3. Use the black cleaning rod to “push”
any debris out of the tube. The clean-
ing rod should be inserted where the
tube attaches to the instrument and
pushed all the way through the tube
and out through the dome.

It is not recommended to submerge or rinse the tube and dome with
water, as water can close the tube. If this should occur, it will prevent
sound coming through the tube, and may be harmful for the instru-
ment’s electronics.
The tube and dome should be changed every third month or sooner if
the tube becomes stiff or brittle.



1. Remove the earmould and the tubing from the hearing instrument
before you clean it.
2. To clean the earmould, rinse with
lukewarm water.
3. If ear wax is stuck in the sound
canal of the earmould,
the cleaning loop or a syringe
with lukewarm water can be used
to “push” the wax out.
4. Blow gently through the tubing to remove moisture trapped inside.
5. Be sure to thoroughly dry the earmould and its tubing before re-
connecting it to the hearing instrument.
The tubing connecting the earmould to the hearing instrument
should be changed if it becomes stiff or brittle. Contact your hearing
care professional to change the tubing when needed.