Service manual

PART III IMPORTANT PARTS - POWER SUPPLY AND TRANSFORMER
E-26
Notice:
As long as the lamps are lighting
up, it means the power supply
transformer is OK. You need not
to change the transformer.
2. Unscrew a black screw on the cable
casing with cross screwdriver.
4. Remove two screws on the
green socket with slotted
screwdriver.
4. Remove two screws on the green
socket with slotted screwdriver.
3. Remove power supply power socket
from the power supply.
1. Remove the power supply
transformer green socket from
main circuit board.
5. Remove two screws on the
green socket with slotted
Replace the power supply transformer
When you disassemble the power supply you will follow the below steps and simply do the reverse operation to install the
transformer. Make sure all the wires are connected correctly.
ENGLISH