Use Instructions

5
Number Displayed Text Meaning Action
1-0
1-1
Carrier Network
Issue
Connection Error
Try removing power from the therapy device
by unplugging the power supply cord’s
connector from the power inlet on the side
of the device, wait 10 seconds, then plug the
cord in again. Then try initiating a manual call
by navigating to the My Provider menu on the
therapy device and selecting “Upload.” See
the “Making a Call” section of this guide. If
problem persists, contact your provider.
The provider should check the Philips
Respironics proprietary compliance software
for additional information.
1-2
1-3
1-4
Call Again Later
2-0
2-1
2-2
2-3
2-4
2-5
Call Again Later
Internal
Communication
Error
Try initiating a manual call by navigating to
the My Provider menu on the therapy device
and selecting “Upload.” See the “Making a
Call” section of this guide. If problem persists,
contact your provider.
The provider should check the Philips
Respironics proprietary compliance software
for additional information.
3-0
Call Product
Support
Software
Conguration Error
Try initiating a manual call by navigating to
the My Provider menu on the therapy device
and selecting “Upload.” See the “Making a
Call” section of this guide. If problem persists,
contact your provider.
The provider should check the Philips
Respironics proprietary compliance software
for additional information.
3-1
Check Enore
Setup
3-2
Call Again Later
4-0
4-1
4-2
4-3
Modem Service
Required
Invalid Device
Conguration Error
Contact your provider. The provider should
check the Philips Respironics proprietary
compliance software for additional
information.
Note: Philips Respironics proprietary compliance software is developed by Philips
Respironics and is intended for use by physicians and home care providers.