User's Manual

- 2 -
Warnings
A warning indicates the possibility of injury to the user or operator.
Device usage
This device is not intended for life support.
Contact your health care professional if symptoms of sleep apnea recur.
Personnel
qualifications
This manual serves as a reference. The instructions in this manual are not intended to
supersede your health care professionals instructions regarding the use of the device.
The prescription and other device settings should only be changed on the order of the
supervising physician.
The operator should read and understand this entire manual before using the device.
Operating
temperature
Do not operate the device in direct sunlight or near a heating appliance because these
conditions can increase the temperature of the air coming out of the device.
Bacteria filter
If the device is used by multiple persons in a hospital environment (such as rental
devices), a low-resistance, main ow bacteria lter should be installed in-line between
the device and the circuit tubing to prevent contamination.
Humidication can increase the resistance of the bacteria lter and the operator must
monitor the bacteria lter frequently for increased resistance and blockage to ensure
the delivery of the therapeutic pressure.
Improperly
functioning
device
If you notice any unexplained changes in the performance of the device, if it is making
unusual sounds, if it has been dropped or mishandled, if water is spilled into the
enclosure, or if the enclosure is cracked or broken, discontinue use and contact your
home care service provider.
Power cord
Route the power cord to the outlet in a way that will prevent the cord from being
tripped over or interfered with by chairs or other furniture.
To avoid strangulation hazards, ensure that all cords connected to the device are
properly routed.
This device is activated when the power cord is connected.
Use only power cords supplied by Philips Respironics for this device. Use of power cords
not supplied by Philips Respironics may cause overheating or damage to the device.