Operator`s manual

19
Care and Maintenance
Clean the device separately from the sensors. For instructions on
cleaning pulse oximeter sensors, refer to the respective sensor
instructions for use.
Clean the device with a soft cloth dampened with isopropyl alcohol. Do not
pour or spray any liquids onto the device, and do not allow any liquid to
enter any openings in the device. Allow the device to dry thoroughly
before reusing.
CAUTION: Do not autoclave or immerse the device or sensors in
liquid. Do not expose the device or components to excessive
moisture or liquids.
CAUTION: Do not use caustic or abrasive cleaning agents on the
device or the sensors.
!
!