Operator`s manual

Table 4: Recommended Separation Distances

This table details the recommended separation distances between portable and

mobile RF communications equipment and this device.

This device is intended for use in an electromagnetic environment in which

radiated RF disturbances are controlled. Users of this device can help prevent

electromagnetic interference by maintaining a minimum distance between

portable and mobile RF communication equipment (transmitters) and the device

as recommended below, according to maximum output power of the

communications equipment.

Separation Distance According to

Frequency of Transmitter

Rated Maximum

Output Power of

Transmitter W

150 kHz to

80 MHz

80 MHz to

800 MHz

800 MHz to 2.5 GHz

0.01 0.12 0.12 0.23

0.1 0.37 0.37 0.74

1 1.2 1.2 2.3

10 3.7 3.7 7.4

100 12 12 23

For transmitters rated at a maximum output power not listed above, the

recommended separation distance d in meters (m) can be estimated using the

equation applicable to the frequency of the transmitter, where P is the maximum

output power rating of the transmitter in watts (W) according to the transmitter

manufacturer.

NOTES:

• At 80 MHz and 800MHz, the separation distance for the higher frequency

range applies.

• These guidelines may not apply in all situations. Electromagnetic propagation

is affected by absorption and reflection from structures, objects, and people.

d 1.17 P=

d 2.33 P=