Specifications

16
EverGo User Manual
Figure 16. To change the flow setting, touch the setting number. (Here, it is the number 1.) is
causes the up flow change arrow to appear. To increase the flow setting, press the up arrow until
you reach your prescribed setting. e flow setting arrow disappears 5 seconds after you touch it.
For another example of the flow change arrows, see the next figure.
Figure 17. To change the flow setting, touch the setting number; here it is 2 1/2. is causes the up
and down arrows to appear. To increase the flow setting, press the up arrow on the right until you
reach your prescribed setting. To decrease your flow setting, press the down arrow. e flow setting
arrows disappear when you touch the number again or 5 seconds after you last touched the screen.
Figure 18. Example of an alarm screen. If the device does not detect breathing for 120 seconds,
it will sound the NB alarm and show this typical display with the NB alarm symbol (NB = No
Breath). e alarm symbol (bell) shows the audio alarm is on. To silence the audio alarm, press the
alarm symbol. For a complete list of alarms, see page 19.
NB SYMBOL FOR
NO BReath aLaRM
aN audiO aLaRM
haS OccuRRed
FLOw SettiNg
PReSS tO tuRN
uNit OFF
uP aRROw tO chaNge
FLOw SettiNg
uP aRROw tO chaNge
FLOw SettiNg
dOwN aRROw
tO chaNge FLOw
SettiNg
PReSS tO tuRN
uNit OFF