User manual

5-1REMSTAR PLUS M SERIES USER MANUAL
CHAPTER 5: ALERTS AND TROUBLESHOOTING
is chapter describes the device alerts and also provides troubleshooting information for issues
you may run into when using the device.
5.1 DEVICE ALERTS
e device provides two alert levels, high and medium priority.
• High Priority – ese alerts require immediate operator response. e alert signal consists
of a high priority sound, which is a continuous two-beep pattern (indicated in the following
table as: • • • •). Additionally, the backlights on the buttons will provide a high priority
flashing pattern consisting of a continuous, bright-to-off, two-flash pattern (indicated in the
following table as: ◊◊ ◊◊ ◊◊).
• Medium Priority – ese alerts require prompt operator response. e alert signal consists of
a medium priority sound, which is a continuous one-beep pattern (indicated in the following
table as: • •). Additionally, the backlights on the buttons will provide a medium priority
flashing pattern consisting of a continuous, bright-to-dim, one-flash pattern (indicated in the
following table as: ◊ ◊ ◊).