User manual

29Us e r Ma n U a l

6. Wash the water chamber and base plate in the dishwasher (top shelf only) or by hand in a

solution of warm water and mild dishwashing soap.

7. Inspect all parts for damage prior to reassembly.

8. Reassemblethewaterchamber.Makesurethebaseplateisfullyseatedonthewaterchamber.

Also, make sure you install the ﬂapper valve properly into the air inlet port of the water

chamber.SeeFigure7-1.

NOTE: Besuretoreinstalltheprotectivecoverontopofthewaterchambertopreventdebris

from entering the water chamber.

9. Fillthewaterchambertothellline.Inspectthewaterchamberforanyleaksordamage.

Replace the water chamber if any damage is present.

7.5 se r v I C e

e SleepEasy device does not require routine servicing.

WARNING: If you notice unexplained changes in the performance of this device, if it is making

unusual or harsh sounds, if the enclosure is broken, or if water has entered the

device, discontinue use, and contact your home care provider.