User manual

Us e r Ma n U a l30
Ch a p T e r 8: sp e C I f I C a T I o n s
en v I r o n M e n T a l
op e r a T I n g sT o r a g e
Te M p e r a T U r e
41°Fto95°F -4°Fto140°F
re l a T I v e hU M I d I T y
15to95%(non-condensing) 15to95%(non-condensing)
aT M o s p h e r I C pr e s s U r e
77to101kPa(0-7500ft) N/A
ph y s I C a l
Dimensions: 10”Lx7.5”Wx5.5”H(25x19x14cm)
Weight: Approximately3.5lbs
WaterCapacity: 350mlatrecommendedwaterlevel
sT a n d a r d s Co M p l I a n C e
is device is designed to conform to the following standards:
– IEC60601-1GeneralRequirementsforSafetyofMedicalElectricalEquipment
– ENISO17510-1SleepApneaBreathingerapyDevices
– ENISO8185GeneralRequirementsforHumidicationSystems
el e C T r I C a l
ACPowerConsumption: 100–240VAC,50/60Hz,2.7Amax.
TypeofProtectionAgainstElectricShock: ClassIIEquipment
DegreeofProtectionAgainstElectricShock: TypeBFAppliedPart
DegreeofProtectionagainstIngressofWater:Device:DripProof,IPX1
ModeofOperation: Continuous
ElectromagneticCompatibility: edevicemeetstherequirementsofEN60601-1-2,
2nd edition.
HeaterSettings: 0=o
 1=113°F
 2=122°F
 3=131°F
 4=140°F
 5=149°F
LEDType: Type1perIEC60825-1.
Fuses: erearenouser-replaceablefuses.