Installation guide

94 Advisor Master Programming Guide
9-Communication options
This menu is used to program all system-wide communication options.
Configuring communication options
PABX number
*-Pause, Ph No:
PABX:
A PABX number hold a number that precedes any other number being dialled.
Used only if the dialler is connected via a PABX to the telephone network.
How to program a telephone number
Press one of these keypad buttons to:
• Number, Enter: Enter the telephone number.
• Menu: Insert a pause or “T” in the telephone number.
• Menu, Menu, Enter: Clear the telephone number
• Enter: Save and display the number.
MSN number
*-Pause, Ph No:
MSN No:
For an ISDN dialler, a MSN number can be programmed. This number is sent to
the ISDN network on dialling to a computer or central station.
See “PABX number” above.
MSN may not contain characters P and T, but only digits between 0 and 9.
Dial tone detection
This option allows you to select the type of dial tone detection: “disabled”,
“CTR21”, “Netherlands”, “UK” and “Other”.
If dial tone detection (DTD) is not disabled then:
• at the beginning of dialling process, or
• after dialling PABX number, or
• when a ‘ * ’ (star) character is spotted in the dialled number,
the dial tone detection will take place.
Select tone dialling
YES-DTMF Tone Dialling
*-Change 0-Skip
Select tone or pulse dialling. For ISDN diallers, this option has no meaning.
Yes: Use tone dialling.