Installation guide

98 Advisor Master Programming Guide
Enter the 1st phone number
*-Pause, Ph No:
Ph1:
Every central station can report to 2 telephone numbers: 1 main and 1 back-up
number. Enter the main number here.
See also “PABX number” (page 94).
Enter the 2nd phone number
*-Pause, Ph No:
Ph2:
Every central station can report to 2 telephone numbers: 1 main and 1 back-up
number. Enter the back-up number here.
See also “PABX number” (page 94).
System account number
System Account - 0000
Acc No:
Account numbers identify alarm systems reporting to central stations. The
system account is used for system events, not linked to an area. Account
numbers are 4 to 6 digits long.
Program 0000 if no system reporting should be made.
Area account numbers
Enter the area 1 account number
*-Next, Area 1 Account - 0000
Acc No:
Program the account code for area 1. Account codes can be 4 to 6 digits long. If
no reporting should be made for this area, program 0000 as account code.
Menu: Select the next area account code to program
Enter the area 2 to 16 account numbers
*-Next, Area 2 Account - 0000
Acc No:
Program the account codes for areas 2 to 16. See “Enter the area 1 account
number” above.
Use BELL modem tones
YES-BELL Modem
*-Change 0-Skip
Specify to use BELL or CCITT modem tones.