Installation guide

Advisor Master Programming Guide 99
Yes: Use BELL modem tones for (X)SIA reporting.
No: Use CCITT modem tones for (X)SIA reporting.
Press 0 to skip further options and move to central stations.
Dual reporting
NO-Dual Tel Line:Reporting
*-Change 0-Skip
If an acknowledge should be received from both phone numbers, set this option
to Yes.
Yes: Use dual reporting.
No: Use normal reporting.
Press 0 to skip further options and move to central stations.
Allow audio listen in
NO-Listen In
*-Change 0-Skip
Specify if audio listen in is allowed with this central station
Yes: Audio listen in allowed.
No: No audio listen in allowed.
Press 0 to skip further options and move to central stations.
Disable reporting of inhibits
NO-Disable Reporting Inhibits
*-Change 0-Skip
Specify if this central station can be used to report inhibits.
Yes: Reporting of inhibits is disabled.
No: Inhibits will be reported.
Press 0 to skip further options and move to central stations.
X-SIA max characters
XSIA Max Characters
*-Change 0-Skip
Specifies the maximum number of characters for XSIA. This option tells the panel
to send either a maximum of 16 or 30 characters to the CS.
X25 account code
X25 Account Code
Acc. Code:
This is the account code for X25 protocols. Max: 8 digits.