Installation guide

110 Advisor Master Programming Guide
12-LED test
LED Test is Off
Code:
This function is used to test all LEDs in the system. This includes LEDs on
arming stations, card readers, etc.
You can turn all the LEDs on by entering a valid code, exit the Programming
menu, check the LEDs on all Arming Stations, then return to the menu to turn the
LEDs off by entering a valid code again.
How to program
Press one of these keypad buttons to:
• Code, Enter: Enter a valid user code and press Enter to turn on/off all the
LEDs in the system.
• Enter: Return to the Programming menu.
Note: Do not forget to turn off the LEDs again.