Installation guide

112 Advisor Master Programming Guide
How to program timezones
Press one of these keypad buttons to:
• Menu: Skip this timezone.
• ?, Enter: Enter a new value.
• Enter: Save the time values displayed and move to the days display.
Note: If you only want to change one of the time values (e.g. change end time
from 17:30 to 18:30), you must re-enter each time value.
Timezone settings
Program start time, hours
Tz 1.1 Start–08:00 End–00:00
Start Hours:
First program the hour for starting time for the timezone, sub-timezone 1.
Program start time, minutes
Tz 1.1 Start – 08:00 End – 00:00
Start Mins:
Enter the minutes for the starting time for the timezone, sub-timezone 1.
Program end time, hours
Tz 1.1 Start–08:00 End–00:00
End Hours:
Program the hours for this sub-timezone to end the valid period.
Program end time, minutes
Tz 1.1 Start–08:00 End–00:00
End Mins:
Finally, program the minutes for this timezone to end the valid period.
Days
Tz 1.1 Days: --,Mo,Tu,We,--,--,--,Hol
(1)Sun-(8)Hol:
Once you have entered the valid time period for the sub-timezone, the next
display that appears lets you enter the days of the week and holidays on which
the timezone is valid.
For the days of the week, enter their numerical value, where Sunday is “1” and
holiday is “8”.
Note: The next displays contain sub-timezones 1.2 to 1.4. These are
programmed in the same way as sub-timezone 1.