Installation guide

Advisor Master Programming Guide 117
• Users cannot operate alarm group restrictions unless the arming station they
are using has the same alarm group restrictions in its alarm group.
Restriction number
Alarm Group Restrictions
Restr. No:
First select the Alarm group restriction to be programmed (numbered from 1
to 8).
Configuring alarm restriction
Alarm group restriction name
Restriction Name: 0352, Cleaner
Text No:
Select the name of an alarm group restriction from the list of words already held
by the ATS system. These words can be from the standard word library (see
Table 9 on page 104) or from a list of words that you have programmed yourself
(programming menu option “10-Program text” on page 102).
Program the alarm group restriction name, using the reference number of the
word. The name should be easily recognisable.
Timed disarm areas
1,2,3,6,7,
1, Timed Area:
When a user enters a code, the programmed areas are disarmed and a timer
starts running. In order for the function to be enabled, the areas listed in this
option must also be listed in the alarm group to which the alarm group restriction
is assigned and alarm system control has to be enabled.
See also “5-Alarm groups” on page 50.
Areas to arm/reset
1,2,3,4,5,
1, A/R Area:
When a user enters a code, the programmed areas are armed or alarms are
reset. In order for the function to be enabled, the areas listed in this option must
also be listed in the alarm group to which the alarm group restriction is assigned
and alarm system control has to be enabled.
See also “5-Alarm groups” on page 50.