Installation guide

Advisor Master Programming Guide 137
25-Display last card
Show the system code and I.D number of the last card read by a reader
connected to the ATS system databus (for doors 1 to 16 only, not for doors 17 to
64 on four-door/four-lift DGP).
Last Card RAS SC=23 User=987654
Press ENTER
In this example the display shows the system code as “SC=23” and the card ID
as “User=987654”.
How to program
• Enter: Return to the Programming menu.
Note: The card must have a valid format that the system is programmed to
recognise.
If the correct system code is not entered in option 20, only the system number is
displayed and not the card ID.
If the correct system code is programmed in option 20, the system code and card
ID are displayed.
26-Reserved menu
Reserved. Do not use.
27-Reserved menu
Reserved. Do not use.