Installation guide

Advisor Master Programming Guide 143
Connection attempts
Connection Attempts 255, Failed 0
Attempts:
Enter the number of attempts that can be made to set up a connection to a
computer. The number of attempt only increases if a connection to a modem is
established, but no correct security password has been received. The display
also shows the number of failed attempts.
Number of rings before answering
Number Of Rings: 0
Rings:
Enter the number of rings before answering an incoming call. If set to 0, incoming
calls will not be answered at all.
Number of calls before answering
Number Of Calls Before Answer: 0
Calls:
Enter the number of calls before answering an incoming call. If set to 0, incoming
calls will not be answered at all. Each incoming call will have to exceed the
number of rings, set in “Number of rings before answering”.
Answering machine defeat
NO-Answering Machine Defeat
*-Change 0-Skip
If the number of rings programmed and the number of calls is met, the next
incoming call will be answered immediately.
See also “Number of rings before answering” and “Number of calls before
answering”
Use Bell 103 protocol
NO-BELL Modem
*-Change 0-Skip
Enables BELL 103 modem tones for the PSTN or ISDN analogue line connection
for Computer reporting.
Connection type
Determines which dialler (on board PSTN or plug in ISDN) the panel will connect
/ report to the computer.
• 0: PSTN
• 1: ISDN
• 2: Not Used
• 3: GSM