Installation guide

Advisor Master Programming Guide 149
32-Custom LCD message
This records 32 characters of customised text that is displayed on the top line of
LCD arming station(s) in place of the normal display. Text is considered any
configuration of up to 32 characters. They can include numbers, spaces or
punctuation.
Aritech, (*) - End
Aritech
Use the text option on the keypad to enter a text of up to 32 characters. Keys 1
to 9 have alphabetical characters printed above them. To enter a letter, press the
key the number of times relative to the position of the letter. Both upper and
lower case letters are available as well as numerical values and spaces. See
Figure 1 on page 103.
Note: When the Menu key is used, only letters preceding the cursor are saved. If
you want to save an existing word, you must enter it again or, using the Enter
key, move the cursor to the end of the word.
Time and Date can be displayed in the RAS LCD display if there are no alarms
active. By entering a point (.) as the first character in custom message, the time
and date will be displayed in the following format: (HH:MM DAY/MONTH/YEAR)
For example: 8:45 02/10/2012.