Installation guide

152 Advisor Master Programming Guide
Siren fail event flag
Siren Fail No Event Flag
Event Flag:
This event flag is activated when a Siren Fail condition is detected on the ATS
panel or a DGP.
See also “Mains fail event flag” på side 151.
DGP isolated event flag
DGP Isolated No Event Flag
Event Flag:
This event flag is activated when a DGP has been isolated via User menu 16,
Isolate/deisolate RAS/DGP.
See also “Mains fail event flag” på side 151.
DGP offline event flag
DGP Offline No Event Flag
Event Flag:
This event flag is activated when a DGP that is programmed to be polled, does
not reply to polling.
See also “Mains fail event flag” på side 151.
RAS offline event flag
RAS Offline No Event Flag
Event Flag:
This event flag is activated when a Remote Arming Station, which has been
programmed to be polled, does not reply to polling.
See also “Mains fail event flag” på side 151.
Duress event Flag
Duress No Event Flag
Event Flag:
This event flag is activated when a duress alarm occurs.
See also “Mains fail event flag” på side 151.
Film out event Flag
Film Out No Event Flag
Event Flag:
This event flag is activated when the film count for a camera exceeds the
programmed film out level described in “Film out level” on page 71.
See also “Mains fail event flag” på side 151.