Installation guide

Advisor Master Programming Guide 153

Report fail event flag

Report Fail (FTC) No Event Flag

Event Flag:

This event flag is activated when the ATS control panel fails to report to the

central station (also referred to as FTC).

See also “Mains fail event flag” på side 151.

Test mode event flag

Testmode No Event Flag

Event Flag:

This event flag is activated when the ATS panel is in test mode.

See also “Mains fail event flag” på side 151.

All armed event flag

All Armed No Event Flag

Event Flag:

This event flag is activated when all areas to report opening/closing are armed,

there are no alarm conditions, and no entry/exit timers are running.

See also “Mains fail event flag” på side 151.

Keypad buzzer event flag

Keypad Buzzer No Event Flag

Event Flag:

When this event flag is activated, the keypad buzzers are activated. The event

flag also has to be assigned to the events that you want the keypad buzzer to

sound on.

See also “Mains fail event flag” på side 151.

Not in use

Dialler active system event flag

Dialer Active No Event Flag

Event Flag:

This flag is active whenever a dialler connection between the panel and CS is

active.