Installation guide

Advisor Master Programming Guide 155
System A (ACPO)
System A (ACPO) No Event Flag
Event Flag:
Event flag associates an event flag with a system A event. A system A event flag
is set whenever any ACPO area A flag is set.
System B (ACPO)
System B (ACPO) No Event Flag
Event Flag:
Event flag associates an event flag with a system B event. A system B event flag
is set whenever any ACPO area B flag is set.
User walk test
User Walk Test No Event Flag
Event Flag:
Indicates that a walk test is running.
User walk test reset
User Walk Test Reset No Event Flag
Event Flag:
Indicates that a walk test was reset.
Panic alarm
Panic Alarm No Event Flag
Event Flag:
The PA Global Alarm Event Flag goes active on a trigger of any PA Area Alarm
Event Flag.
The PA Global Alarm Event Flag goes inactive on a state change from active to
non-active of any PA Area Alarm Event Flags.
RAS isolated
RAS Isolated No Event Flag
Event Flag:
A RAS connected to the panel LAN may be isolated via the keypad, via the Titan
Control Panel menu RAS (Isolate/De-isolate), or automatically isolated as a
result of timed persistent failure (e.g. ACPO, NFA2P).
When any RAS is isolated, regardless of how it was done, the flag will be set.
De-isolating the RAS will reset the flag.