Installation guide

Advisor Master Programming Guide 157
35-Program macro logic
Macro logic provides a powerful tool for activating zones or event flags under
specific conditions. These conditions are macro inputs being triggered, logic
equations combining the macro inputs and output conditions.
Up to four macro inputs can be included in the logic equation. A macro input is an
event flag or an output. Each macro input in the logic equation can be
programmed as an AND or an OR function and can be programmed to invert the
logic.
Programming options are provided so that the macro result will trigger a macro
output as a pulse, time, on delay, off delay or latch when activated.
Figure 3: Overview of macro logic
Event flag / output 1
Event flag / output 2
Macro logic equation
“1 AND 2 OR 3”
Event flag / output 3
Macro output timing
T1 >> T2
Event flag / output 4
Event flag or zone
Caution: It is very important to plan the Macro Logic carefully on paper, noting all
details, and the origin of every zone and/or event flags, before attempting to
program.
See also “Event Flags” (page 177) and “16-Event to output” (page 121).
Program number
Macro Logic Number
Macro No:
Enter the number of the macro logic program. There are 24 programs available.