Installation guide

Advisor Master Programming Guide 163
43-Test calls
This menu holds programming regarding test calls to central stations.
Test call settings
Select central station number
Select one of the 4 available central stations to set the test call for.
Start test call
Start First Test Call at: 00:00
Hours:
Enter the time in hours and minutes, when a test call should be made. The time
programmed is based on the real time clock.
Test call interval
Test Call Interval 00 Hours
Hours:
Specify the interval between test calls (in hours).
Extend test call
NO-Extend Test Call
*-Change 0-Skip
Only send a test call if no reporting during the test call interval.
Yes: Only if no event at all has been reported during the test call interval, a test
call will be made.
No: Test calls will be made after each test call interval.
44 to 49-Reserved menus
Reserved. Do not use.