Installation guide

168 Advisor Master Programming Guide
Reporting code No.
Reporting code
Voice alarm message
18
136 BA Outdoor
19
137 BA Tamper
20
138 BA Near Alarm
21
140 UA General Alarm
22
Low battery
23
Low battery restore
24
Mains restore
25
Technical restore
Note that event code 130 BA Burglary in the user table and code 1 – Burglar
Alarm BAA in table 1 are the same event codes (130). If 130, BA in the user table
is programmed with an alarm message, then this will have priority over event
code 1 - BA Burglar alarm in table 1.
Voice message no.
This is the voice message number (values range from 0 to 14) stored in the voice
module (ATS7200) and assigned to specified event numbers. Value '0' means
“No message assigned”