Installation guide

Advisor Master Programming Guide 171
Enable history Search and Play
YES-Enable History Search And Play
*-Change 0-Skip
The ATS panel will have a new menu set added which will be used to emulate a
subset of the DVMR front panel controls. This feature will allow an ATS panel
operator to view and search recorded footage via the RAS. This feature will be
used when the DVMR front panel controls are not accessible and the panels
RAS is located next to a spot monitor.
In addition to this, a Search and Play feature will also be supported. This will
allow a user to enter the history menu on the panel RAS and advance the DVMR
playback to the footage recorded at the point of the event occurring. Once the
Search and Play command has been issued to the DVMR, the RAS can display
the DVMR RAS controls so the user can control the payback if the option is
selected.
Yes: Enables the associated RAS (see “RAS permission” below) to search for
and/or play a particular footage.
No: No search or play is allowed via the RAS.
RAS permission
No RAS Assigned
RAS Permitted:
2,
RAS Permitted:
DVMRe 1-Play, 2-Search, 3-Camera, 4-View
Menu:
The RAS permission menu enables the Installer to select, which RASs are
connected to the panel, have permission to issue Search and Play. It also
controls commands to the DVMRe while in the Quick or User Histories.
Up to 16 RASs can be selected in this menu option to have Search and Play and
command control of the DVMRe.