Installation guide

14 Advisor Master Programming Guide
Zone type
Description
44.
Firedoor with AlmGrp
Restr.
Generates a local alarm when the area is disarmed but does
not report it to the central station.
This alarm can only be acknowledged by entering "user code,
Off, area, Enter" on the arming station
Generates an alarm when the area is armed but the zone can
be disabled when two users with alarm group restrictions
have entered their user code (not necessarily in the same
area).
Example: Fire door or emergency door.
Note: You need to program alarm groups (see “5-Alarm
groups”, page 50) and alarm group restrictions (see “15-Alarm
group restrictions”, page 115).
45.
(Event Flag/Arm.Alm)
Restr.
Activates the zone event when the area is disarmed.
Generates an alarm when the area is armed, but the zone can
be disabled if two users with alarm group restrictions have
entered their user code (not necessarily in the same area).
Note: You need to program alarm groups (see “5-Alarm
groups”, page 50) and alarm group restrictions (see “15-Alarm
group restrictions”, page 115).
46.
Disarm Alm/Arm Gen.
Alm
Generates an alarm if the area is disarmed.
Generates a general burglar alarm if the area is armed.
47.
Dis. Alm Susp/Arm Gen.
Alm
When disarmed generates an alarm and activates the
cameras. When the zone closes to normal state, the cameras
continue to operate for the suspicion time.
Generates a general alarm if the area is armed.
48.
Camera 1 Film Out
Generates an alarm when camera 1 is out of film
49.
Camera 2 Film Out
Generates an alarm when camera 2 is out of film.
50.
Camera 3 Film Out
Generates an alarm when camera 3 is out of film.
51.
Camera 4 Film Out
Generates an alarm when camera 4 is out of film.
52.
Camera 5 Film Out
Generates an alarm when camera 5 is out of film.
53.
Camera 6 Film Out
Generates an alarm when camera 6 is out of film.
54.
Camera 7 Film Out
Generates an alarm when camera 7 is out of film.
55.
Camera 8 Film Out
Generates an alarm when camera 8 is out of film.
56.
Firedoor if No TZ 41
If timezone 41 is invalid, the zone has the following function:
• Generates a local alarm when the area is disarmed but
does not report it to the central station.
• This alarm can only be acknowledged by entering "user
code, Off, area, Enter" on the arming station.
• Generates an alarm when the area is armed.
If timezone 41 is valid, the zone is disabled.
Example: Fire door or emergency door.
Note: You need to program the local alarm reminder time
(see “6-Timers”, page 62) and to link timezone 41 to an output
(see “16-Event to output”, page 121).