Installation guide

200 Advisor Master Programming Guide

RAS options required by EN 50131

compliance

Each arming scenario described below meets EN 50131 requirements.

Using PIN only

• “Timed lockout by wrong codes” on page 44: Yes

Using Card and PIN

• “Cards auto disarm” on page 43: No

• “Card always arms/disarms” on page 43: No

• “Timed lockout by wrong codes” on page 44: Yes

• “Cards arm after 3 badges” on page 44: No

• “Card & PIN (always)” on page 46: Yes

• “Timed lockout by wrong badges” on page 47: Yes

• “RAS card & PIN timeout” on page 67: 30 s

Using card only

• “Cards auto disarm” on page 43: No

• “Card always arms/disarms” on page 43: No

If set to Yes, set “Cards arm after 3 badges” on page 44 to No.

• “Timed lockout by wrong codes” on page 44: Yes

• “Cards arm after 3 badges” on page 44: Yes

• “Card & PIN (always)” on page 46: No

• “Timed lockout by wrong badges” on page 47: Yes

See also the appropriate RAS manual for more details.